KMDE-1212静止型脱磁机 日本KANETEC强力牌
隧道型退磁机 型号：
KMDE-1212、KMDE-2525､KMDE-4040
隧道型退磁机 别名：
静止型脱磁机、脱磁器
隧道型退磁机 用途：
用来除去带磁的工件和工具类的残留电磁。不需要移动 工件，只要按下退磁按钮，经过一定时间，退磁即完毕。
隧道型退磁机 特点：
●设定了比交流退磁机较高的起磁力。过去的退磁机对 轴承钢、刀具钢等的硬质工件较难退磁。但是本退磁 机却能发挥良好效果。
●只要把工件安放在退磁机上即可退磁。和交流退磁机 不同，它不需要把工件、冲模的构件、SK 材料通过退 磁机。适宜用于搬运较困难的大型工件（模件等）的退 磁。
●通过设置在电源装置的衰减模式的程序进行退磁，因 此只在退磁时通电，从而节省了电力。
●退磁机主体和电源装置部是分别安放的规格。可设置在容易操作的地点。
Model KMDE STATIONARY DEMAGNETIZER
KMDE-1212、KMDE-2525､KMDE-4040
[Application]
Used to eliminate residual magnetism in magnetized workpieces
and tools. Pressing the demagnetizing button can complete
demagnetization within a certain time without moving
workpieces.
[Features]
A magnetomotive force greater than the AC demagnetizer has
been set, which works well on hard workpieces such as
bearing steel and cutter steel that are difficult to demagnetize
with conventional demagnetizers.
Since workpieces are demagnetized while they are kept
stationary on the demagnetizer, it is not necessary to move
workpieces, press die materials, SK materials, etc. as when
using an AC demagnetizer. Thus, this model is suitable for
demagnetization of large workpieces (e.g. molds) that are
difficult to move.
Since demagnetization is carried out according to the
attenuation pattern programmed in the control unit, electricity
needs to be applied only during demagnetization, thus saving
electricity.
The demagnetizer itself and the control unit are installed
separately. Thus, they can be installed in an easy-to-operate
place.
